服务热线: 400-117-8816
           13406879330

专注于扭剪型电动扳手、扭剪型手动扳手、定扭矩电动扳手、扭矩倍增器的研发与生产

当前位置:PK10计划>新闻中心>非标扭力扳手检定仪定制注意事项!

非标扭力扳手检定仪定制注意事项!

来源:http://www.bisnisfresh.com 日期:2020-05-26 发布人:admin

  非标扭力扳手检定仪定制注意事项:市面上销售的扭力扳手检定仪都是标准型的。如果用户需要购买扭力扳手检定仪但是标准的扭力扳手检定仪却无法满足您的测力需求,这个时候您就可以选择有能力的扭力扳手检定仪供应商,让他们为您专门定制一套特殊的扭力扳手检定仪。那么,如果需要定制扭力扳手检定仪我们该注意些什么呢?要向供应商提供哪些资料呢?定制扭力扳手检定仪之前一定要问清楚供应商有无能力承接扭力扳手检定仪非标定制的单子,确认好后将你的要求告诉给供应商,让其为你设计一套符合要求的扭力扳手检定仪,确认好后就可以投入制作了。

  Notes for customization of non-standard torque wrench calibrator: all torque wrench calibrators sold on the market are standard. If the user needs to buy a torque wrench calibrator, but the standard torque wrench calibrator can't meet your demand for measuring force, then you can choose a capable torque wrench calibrator supplier, and let them specially customize a set of special torque wrench calibrator for you. So, what should we pay attention to if we need to customize the torque wrench calibrator? What information should be provided to suppliers? Before customizing the torque wrench calibrator, it is necessary to ask the supplier whether he is able to undertake the non-standard customized list of the torque wrench calibrator. After confirmation, tell the supplier your requirements, and let him design a set of qualified torque wrench calibrator for you. After confirmation, it can be put into production.
  定制扭力扳手检定仪还需注意下面几点:
  The following points need to be paid attention to for the calibration instrument of customized torque wrench:
  点:材料。我们都知道,这类扭力扳手检定仪都是金属材质的,但有些生产商偷工减料,不采用实心金属,甚至是以别的材质来替代,这不仅让扭力扳手检定仪没有实用性,甚至是无法长久工作。所以说,对于定制生产商的所用材料,我们一定要明确好,当然,扭力扳手检定仪的定制也要如此。
  Point: material. As we all know, this kind of torque wrench calibrator is made of metal, but some manufacturers cut corners, do not use solid metal, or even replace it with other materials, which not only makes the torque wrench calibrator not practical, or even unable to work for a long time. Therefore, we must be clear about the materials used by the customized manufacturers. Of course, the customization of the torque wrench calibrator is also necessary.
  第二点:基础设施。这类扭力扳手检定仪的基础设施有很多,测力仪表,扭力扳手检定仪把,传感器等等,这些设施中任何一个存在问题,该扭力扳手检定仪都不具备使用优势,更不要说测重了。所以说,在定制时,基础设施也要与生产定制商确定好,其他扭力扳手检定仪的定制也要如何。
  Second, infrastructure. There are many infrastructures of this kind of torque wrench calibrator, such as force measuring instrument, torque wrench calibrator handle, sensor and so on. If any of these facilities has problems, the torque wrench calibrator does not have the use advantage, let alone the weight measurement. Therefore, during customization, the infrastructure should be determined with the manufacturer, as well as the customization of other torque wrench calibrators.
  以上两点,就是我们在定制扭力扳手检定仪时考虑的情况,该扭力扳手检定仪的定制材料,基础设施,都不可忽视。当然,对于生产定制商,我们也要特别注意,要选择知名度高,服务态度好的商家,如此所定制出来的扭力扳手检定仪,才有使用的保证。
  The above two points are considered when we customize the torque wrench calibrator. The customized materials and infrastructure of the torque wrench calibrator cannot be ignored. Of course, we also need to pay special attention to the customized manufacturers. We need to choose the high-profile and good service attitude merchants, so that the customized torque wrench tester can be used.

PK10计划 全天PK10计划 PK10计划 PK10计划 PK10计划 全天PK10计划 全天PK10计划 PK10计划 PK10计划 PK10计划